Haitai double head cable ties secure two cable bundles, hoses or pipes in separate connected loops using two independent locking heads. The HTD series uses INVISTA U4820L PA66, with 4.8 mm width, catalog lengths of 200, 250, 300 and 370 mm and an installation range of −20°C to +85°C; confirm both bundle diameters and packaging for bulk or OEM supply.
Material: PA66 (nylon 66), INVISTA U4820L
Installation temperature: −20°C to +85°C
Catalog sizes: 4.8 mm wide; lengths 200, 250, 300 and 370 mm
Models: HTD-200ST, HTD-250ST, HTD-300ST, HTD-370ST
Structure: Two independent locking heads for two connected loops; confirm each bundle diameter and spacing.
Packaging: 100, 500 or 1,000 pcs/bag options; confirm the selected model and order.
製品詳細
Haitai double head cable ties use two independent locking heads to secure two cable bundles, hoses or pipes in separate connected loops. The standard PA66 range uses INVISTA U4820L, with an installation temperature range of −20°C to +85°C.
Also called dual-head cable ties or double-headed zip ties, this design supports two-bundle routing with one integrated tie. The current catalog lists 4.8 mm width and 200, 250, 300 and 370 mm lengths; confirm the usable loop size for each bundle from the selected model drawing.
For bulk or OEM purchasing, provide both bundle diameters and the required spacing in mm, plus material configuration, color, quantity and packaging. Review the Haitai manufacturer profile or send your drawing through the product inquiry form for model confirmation.
Two locking heads form separately tightened, connected loops for two cable bundles, hoses or pipes.
PA66 nylon made with INVISTA U4820L, with an installation temperature range of −20°C to +85°C.
Specify the diameter of each bundle and the required spacing in mm to check the two-loop arrangement.
仕様参照
The existing catalog lists four 4.8 mm-wide double head models, with lengths of 200, 250, 300 and 370 mm. These are catalog length fields, not the usable length or maximum bundle diameter of each loop; confirm the selected drawing and both bundle dimensions before ordering.
| モデル | Width (mm) | Catalog length (mm) | Structure |
|---|---|---|---|
| HTD-200ST | 4.8 | 200 | Double head |
| HTD-250ST | 4.8 | 250 | Double head |
| HTD-300ST | 4.8 | 300 | Double head |
| HTD-370ST | 4.8 | 370 | Double head |
The HTD-200ST, HTD-250ST, HTD-300ST and HTD-370ST references identify the four catalog models above. Confirm the drawing for the diameter and tightening allowance of each loop rather than calculating either loop from the listed length alone.
| Parameter | Haitai double head cable ties / ordering requirement |
|---|---|
| 素材 | PA66 (nylon 66), INVISTA U4820L for the standard range. |
| Installation temperature | −20°C to +85°C; confirm continuous working temperature separately. |
| Locking structure | Two independent locking heads for two connected loops. |
| Bundle fit | Specify each bundle diameter and required spacing in mm; confirm the usable loop range on the selected drawing. |
| Tensile requirement | Specify the required force in N and test configuration; two heads do not establish twice the tensile strength or a safe working load. |
| Color and exposure | Natural or black; specify and confirm a UV-resistant configuration for outdoor use. Black color alone is not a UV rating. |
| Release or reuse | Do not assume a releasable mechanism; confirm any reopening requirement before ordering. |
| Bag quantities | Catalog options: 100, 500 or 1,000 pcs/bag; confirm availability for the selected model and order. |
| Bulk and OEM orders | Provide the HTD model, quantity, label artwork requirements, carton markings and destination. |
| Drawings and documents | Request model-specific dimensions, test information and applicable compliance documentation; confirm service temperature in °C and exposure conditions. |
The −20°C to +85°C installation range applies during fitting, not as a continuous working-temperature specification. Confirm the operating environment for the chosen configuration.
Two independently tightened loops provide a routing arrangement, not a 2× strength rating. For background, see the cable tie size chart and tensile strength guide.
アプリケーション
Dual Cable Bundling
Use the two locking heads to secure separate cable groups in connected loops. Provide both bundle diameters and the required spacing in mm to confirm the selected model and routing arrangement.
Cable and Pipe Separation
Route cables, hoses or pipes in two distinct loops during equipment assembly or maintenance. Specify outside diameters and clearance in mm, and confirm contact pressure, temperature and exposure requirements for the application.
Double head cable ties form two connected loops for separately securing cable bundles, hoses or pipes. The two independent locking heads allow each loop to be tightened around its own bundle.
The catalog lists HTD-200ST, HTD-250ST, HTD-300ST and HTD-370ST, all 4.8 mm wide with respective lengths of 200, 250, 300 and 370 mm. Confirm the model drawing and both bundle diameters before ordering.
Provide each bundle diameter and the desired spacing in mm, together with a drawing of the arrangement. The listed catalog length is not the usable length or maximum bundle diameter of each loop, and the loops do not have to be assumed equal in size.
No: two heads describe the fastening structure, not a 2× strength rating. Confirm model-specific tensile performance in N, the test configuration and the application requirements; do not treat a tensile figure as a safe working-load rating.
No: this double head design has two independent heads for two connected loops. A double-locking designation describes a locking arrangement and should be checked against its own product drawing rather than treated as an interchangeable name.
The standard PA66 range uses INVISTA U4820L and has an installation temperature range of −20°C to +85°C. Confirm continuous working temperature, UV exposure and any special environmental requirements separately for the selected configuration.
Two locking heads do not establish a releasable mechanism, so confirm any reopening requirement before selecting the model. For this PA66 range, outdoor use requires a confirmed UV-resistant configuration; black color alone does not establish outdoor performance.
The catalog lists 100, 500 and 1,000 pcs/bag options, subject to confirmation for the selected model and order. For a bulk or OEM quotation, send the HTD model, both bundle sizes, color, bag quantity, label requirements, carton markings and destination.
パッケージング・OEM
ハイタイは、バルク包装、標準ポリ袋、小売用袋、ラベル、カートンマーク、および選択されたプライベートラベルの要件を含む、さまざまな包装要件に対応できます。確認のため、ターゲット市場、袋の数量、カートンのサイズ、および年間購入計画をお知らせください。.
お見積もり依頼
関連製品
Haitai reusable push-mount cable ties combine a releasable PA66 strap with a push-in mounting head for adjustable cable routing on panels and frames. The standard range uses INVISTA U4820L and installs at −20°C to +85°C; confirm mounting-hole dimensions, panel thickness, bundle size and packaging for bulk or OEM supply.
Haitai releasable cable ties use a release tab to open and readjust the strap without cutting. Made with INVISTA U4820L PA66, the HTN catalog offers 4.8 mm and 7.6 mm widths, lengths from 150 mm to 760 mm, and an installation range of −20°C to +85°C; specify size, bundle diameter, color and packaging for bulk or OEM supply.
Haitai tube fixing cable ties combine a tube-positioning structure with a self-locking PA66 strap for equipment tube, hose and conduit routing. The standard range uses INVISTA U4820L and installs at −20°C to +85°C; specify actual tube outside diameter, wall thickness, holder clearance and packaging for bulk or OEM orders.
Haitai marker cable ties secure and label cable bundles with a self-locking PA66 strap and an integrated identification tag. Made with INVISTA U4820L, they have an installation temperature range of −20°C to +85°C; for bulk or OEM supply, specify strap dimensions, bundle diameter, writable tag area, marking and packaging.
Haitai chassis cable ties position automotive wiring harnesses using a separate head and strap, both made from INVISTA U4820L PA66. The HTX-250CT / HTX-280CT range offers 7.5 × 250 mm / 7.5 × 280 mm sizes and an installation temperature of −20°C to +85°C; specify bundle diameter, mounting layout, matching accessories and packaging for bulk or OEM supply.
製品FAQ
標準製品につきましては、通常サンプル手配が可能です。特注の素材、包装、または色につきましては、生産前にサンプルの時期をご確認ください。.
はい。バルク梱包、ポリ袋、小売用袋、ラベル、カートンマーク、プライベートラベルの要件については、注文数量に基づいてご相談いただけます。.
幅、長さ、素材、色、数量、梱包、認証要件、仕向港、および適用環境を提供してください。.
