Haitai chassis cable ties position automotive wiring harnesses using a separate head and strap, both made from INVISTA U4820L PA66. The HTX-250CT / HTX-280CT range offers 7.5 × 250 mm / 7.5 × 280 mm sizes and an installation temperature of −20°C to +85°C; specify bundle diameter, mounting layout, matching accessories and packaging for bulk or OEM supply.
製品詳細
Haitai chassis cable ties use a separate head and strap for automotive wiring-harness positioning. Both components are made from INVISTA U4820L PA66, with 7.5 × 250 mm and 7.5 × 280 mm catalog sizes.
The confirmed installation temperature is −20°C to +85°C. Select the matching head, strap and isolation accessories against the actual bundle diameter and mounting layout; a separated structure does not by itself mean the tie can be released and reused.
For bulk or OEM sourcing, specify HTX-250CT or HTX-280CT, the required component set, quantity and packaging. Share the vehicle location and exposure conditions so the assembly can be reviewed for the intended application.
The head and strap both use INVISTA U4820L PA66, with an installation range of −20°C to +85°C. Confirm the material of any separately supplied accessory with the order.
A separate head and strap are matched as an assembly in 250 mm and 280 mm lengths. Specify which matching accessories are required in each supplied set.
The 7.5 mm wide HTX series supports vehicle wiring-harness positioning. Check bundle size, mounting clearance and the exposure conditions at the proposed installation location.
仕様参照
The HTX catalog contains 2 models, both 7.5 mm wide, with head and strap made from INVISTA U4820L PA66. Use the table below to select a length, then confirm the matching component drawing and packaging before ordering.
| モデル | Head and strap material | Width (mm) | Length (mm) | Structure |
|---|---|---|---|---|
| HTX-250CT | INVISTA U4820L PA66 | 7.5 | 250 | Separate head and strap |
| HTX-280CT | INVISTA U4820L PA66 | 7.5 | 280 | Separate head and strap |
| Parameter | Specification or order requirement |
|---|---|
| Head and strap material | PA66 (nylon 66), INVISTA U4820L; confirm separate accessory materials with the order. |
| Installation temperature | −20°C to +85°C. |
| Model and component set | HTX-250CT or HTX-280CT; approve the matched head, strap and accessory drawing. |
| Bundle fit | Provide the actual bundle outside diameter in mm; total strap length is not a bundle-diameter rating. |
| Mounting layout | Provide the panel or chassis layout, available clearance and required mounting dimensions in mm. |
| Accessory supply | Specify the matching isolation accessories and number of components per set; inclusion depends on the quotation. |
| Mechanical performance | Agree the required force in N, test method and conditions; distinguish strap tensile strength, head retention and complete-assembly holding force. |
| Working temperature | Confirm the required service temperature in °C and exposure duration for the application; the installation range is not a working-temperature rating. |
| Exposure conditions | Identify fluid contact, sunlight, vibration and harness movement at the proposed vehicle location. |
| Packaging and documents | Confirm sets per bag/carton, labels, component drawings and any required test or approval documents. |
Do not calculate a safe working load or bundle diameter from the 7.5 mm width and 250/280 mm lengths alone. Review the cable tie size chart and tensile strength guide when defining the order specification.
アプリケーション
Automobile Chassis Wiring Harness
Use the 250 mm or 280 mm HTX assembly to position a wiring harness within the approved vehicle layout. Check the head, strap and matching accessory fit against the harness drawing before bulk installation.
Vehicle Underbody Cable Management
For underbody routing, provide bundle diameter and clearance in mm, together with expected fluid contact, movement and exposure temperatures. The chassis product name does not establish a vehicle-OEM approval or an environmental performance rating; see our automotive wiring selection guide.
The HTX series positions automotive wiring harnesses using a separate head and strap, with matching accessories selected for the layout. The catalog offers 7.5 × 250 mm and 7.5 × 280 mm assemblies.
Choose HTX-250CT for the 250 mm catalog length or HTX-280CT for 280 mm. Confirm actual bundle diameter and mounting clearance in mm; strap length is not the maximum bundle diameter.
No, both HTX-250CT and HTX-280CT use separate head and strap components. Match the components to the approved assembly drawing before installation.
Accessory supply is agreed in the quotation for the selected HTX model. Specify the required parts and quantity per set, rather than assuming every pictured component is included.
No electrical insulation voltage rating is stated for HTX-250CT or HTX-280CT on this page. The accessory name describes the component, not verified electrical protection; provide the required voltage and test criteria if relevant.
A separate head and strap do not establish a release mechanism or a reuse-cycle rating for either of the 2 HTX models. If repeated opening is required, compare our dedicated releasable cable ties and confirm the intended use.
Both the head and strap use INVISTA U4820L PA66, and the confirmed installation range is −20°C to +85°C. Confirm the working-temperature requirement separately for the actual application; installation temperature is not a long-term service rating.
Send HTX-250CT or HTX-280CT, quantity, bundle diameter in mm, mounting drawing, required accessories and packaging. Include the application location and any test-document requirements; learn about Haitai or request a quotation.
パッケージング・OEM
ハイタイは、バルク包装、標準ポリ袋、小売用袋、ラベル、カートンマーク、および選択されたプライベートラベルの要件を含む、さまざまな包装要件に対応できます。確認のため、ターゲット市場、袋の数量、カートンのサイズ、および年間購入計画をお知らせください。.
お見積もり依頼
関連製品
Haitai reusable push-mount cable ties combine a releasable PA66 strap with a push-in mounting head for adjustable cable routing on panels and frames. The standard range uses INVISTA U4820L and installs at −20°C to +85°C; confirm mounting-hole dimensions, panel thickness, bundle size and packaging for bulk or OEM supply.
Haitai releasable cable ties use a release tab to open and readjust the strap without cutting. Made with INVISTA U4820L PA66, the HTN catalog offers 4.8 mm and 7.6 mm widths, lengths from 150 mm to 760 mm, and an installation range of −20°C to +85°C; specify size, bundle diameter, color and packaging for bulk or OEM supply.
Haitai marker cable ties secure and label cable bundles with a self-locking PA66 strap and an integrated identification tag. Made with INVISTA U4820L, they have an installation temperature range of −20°C to +85°C; for bulk or OEM supply, specify strap dimensions, bundle diameter, writable tag area, marking and packaging.
製品FAQ
標準製品につきましては、通常サンプル手配が可能です。特注の素材、包装、または色につきましては、生産前にサンプルの時期をご確認ください。.
はい。バルク梱包、ポリ袋、小売用袋、ラベル、カートンマーク、プライベートラベルの要件については、注文数量に基づいてご相談いただけます。.
幅、長さ、素材、色、数量、梱包、認証要件、仕向港、および適用環境を提供してください。.
