Haitai supplies reverse tooth cable ties with outside serrations and a smooth inner surface for wire harness bundling. The listed PA66HS version measures 4.6 × 200 mm, has a 50 mm maximum bundle diameter and a minimum tensile strength of 225 N, and is packed at 100 pcs/bag. Installation is specified from -20°C to +85°C; send the required quantity, color, service conditions and packaging for a factory quotation.
Material: PA66HS (heat-stabilized polyamide 6.6)
Installation temperature: -20°C to +85°C
Working temperature: -40°C to +105°C
Raw-material flammability: UL 94 HB (resin rating; request the applicable resin data sheet)
For short-term heat exposure, specify the peak temperature and exposure duration when requesting samples. Finished-product certification and application requirements should be confirmed for the selected model.
Detalles del producto
Outside serrations leave the bundle-contact side of this PA66HS cable tie smooth. The listed 4.6 mm strap can be considered where contact with cable insulation matters; check the finished assembly, strap edges and installation tension on a sample.
PA66HS identifies a heat-stabilized polyamide 6.6 formulation, and Haitai’s listed working-temperature range for this version is -40°C to +105°C. The installation range is -20°C to +85°C; specify peak temperatures and exposure times when reviewing a wiring-harness application.
The 4.6 mm strap has outside serrations and a smooth bundle-contact face. Review insulation contact and tightening tension on the actual harness.
PA66HS is the listed heat-stabilized material. Working temperature: -40°C to +105°C; installation: -20°C to +85°C.
The listed 200 mm length accommodates a maximum 50 mm bundle diameter. Minimum tensile strength is 225 N, with 100 pcs/bag packaging.
Referencia de especificación
The table describes the 4.6 × 200 mm PA66HS reverse-tooth configuration currently listed by Haitai. Confirm the required color, exact order reference and any application-specific test documents when requesting samples.
| Parameter | Specification |
|---|---|
| Ancho de la correa | 4.6 mm |
| Overall length | 200 mm |
| Maximum bundle diameter | 50 mm |
| Minimum tensile strength | 225 N |
| Material | PA66HS, heat-stabilized polyamide 6.6 |
| Strap structure | Outside serrations with a smooth inner surface |
| Installation temperature | -20°C to +85°C |
| Temperatura de trabajo | -40°C to +105°C |
| Standard packaging | 100 pcs/bag |
| Listed hand tool | FSZ-800Z; confirm tool suitability and tension setting |
Request the 4.6 × 200 mm reverse-tooth configuration and confirm the exact HTS model reference in the quotation. For other sizes, provide your width, length and bundle-diameter requirements in mm.
The 225 N tensile value is not a safe working-load rating or an installation-tool tension setting. Check the selected tool and finished bundle before production use.
Aplicaciones
The listed 4.6 × 200 mm tie is intended for wire harness bundling in vehicle assemblies, electronics and control equipment where a smooth strap-contact surface is useful. Compare the measured bundle diameter with the 50 mm maximum and confirm temperature, vibration and fluid-exposure requirements for the actual installation.
For a broader selection checklist, see abrazaderas para cableado automotriz and the cable tie size chart. PA66HS identifies the material formulation; it does not by itself establish approval to an automotive customer’s specification.
Automotive Wiring Harness
Evaluate the 4.6 × 200 mm PA66HS tie for the intended vehicle harness. Check insulation contact, routing clearance and the applicable temperature profile.
Electronics and Precision Equipment
Use the 50 mm maximum bundle diameter as an initial fit check for control-system wiring. Confirm the head clearance and tightening tension on a sample assembly.
This 4.6 mm reverse-tooth strap has serrations on the outside and a smooth inner face against the bundle. It offers a different contact surface from a conventional inside-serrated tie; check the strap, edges and locking head against your cable insulation.
The listed configuration is 4.6 × 200 mm with a maximum bundle diameter of 50 mm. Include the measured bundle diameter and required quantity in your enquiry, and confirm the exact HTS order reference before production.
The listed minimum tensile strength is 225 N. This is not a safe working-load rating, a lifting capacity or an installation-tool tension setting.
Installation is specified from -20°C to +85°C, while the listed working range for this PA66HS version is -40°C to +105°C. For peak-temperature exposure, provide the temperature and duration so that suitability can be reviewed for the selected model.
The 4.6 × 200 mm PA66HS version is an option to evaluate for automotive harness bundling. Confirm the customer specification, harness fit, temperature profile, vibration and fluid exposure; the material designation alone is not an automotive approval.
No: the PA66HS designation identifies heat-stabilized nylon, while outdoor UV performance must be specified separately for the selected 4.6 × 200 mm version. See our nylon 66 versus UV-resistant cable tie guide and request the relevant outdoor test information.
Haitai lists FSZ-800Z as the hand-tool reference for this configuration. Confirm compatibility and trial the tension setting on the actual harness; do not use the 225 N tensile value as a tightening setting.
The listed standard pack is 100 pcs/bag, and bulk or private-label requirements can be reviewed with the order. Send the 4.6 × 200 mm size, color, quantity, service conditions, destination and packaging requirements through the product enquiry form; learn more about the manufacturer on Acerca de Haitai.
Empaquetado y OEM
Haitai puede ofrecer soporte para diferentes requisitos de empaque, incluyendo empaque a granel, bolsas de polietileno estándar, bolsas para venta minorista, etiquetas, marcas de cartón y requisitos de marca privada seleccionados. Por favor, comparta su mercado objetivo, cantidad de bolsas, tamaño de cartón y plan de compra anual para confirmación.
Solicitar presupuesto
Productos relacionados
Haitai manufactures 7.2 mm heavy duty cable ties from INVISTA 4820L PA66 in 18 listed lengths from 150 mm to 760 mm. The series is listed at 560 N / 130 lbf tensile strength; buyers can specify length, bundle diameter, color, packaging and quantity for an OEM or bulk quotation. Tensile strength is a product test value, not a safe working-load rating.
Haitai manufactures 4.4 mm PA66 standard cable ties in 15 lengths from 100 to 500 mm for wholesale, OEM and industrial purchasing. The series is specified at 222 N (50 lbf) minimum loop tensile strength, uses INVISTA U4820L PA66, and is designed for installation from -20°C to +85°C. All listed models use the HTS-4.4X[length] format and standard 100 pcs/bag packaging; confirm color, bundle diameter, required documents and packaging artwork in the purchase specification.
Las bridas de nylon de tipo inverso están diseñadas con dientes hacia afuera y una superficie interior lisa para una sujeción más segura alrededor de fundas de esponja, cubiertas de espuma y equipos de juego blandos.
Haitai PA46 (nylon 46) cable ties have a continuous operating temperature range of −40°C to +150°C and a time-limited high-temperature rating of +195°C for up to 500 hours. For heat-exposed automotive and industrial wiring, specify dimensions, tensile strength, temperature profile, quantity and packaging for a bulk or OEM quotation. Confirm the installation range for the selected model; the +195°C / 500-hour condition is not an unrestricted continuous operating rating.
Haitai manufactures 4.8 mm PA66 standard self-locking cable ties in 15 lengths from 100 to 920 mm for wholesale, OEM and industrial wiring. The series is specified at 220 N minimum loop tensile strength, uses INVISTA U4820L PA66, and is designed for installation from -20°C to +85°C. Models follow the HTS-4.8X[length] format; standard packaging is 100 pcs/bag except HTS-4.8X920 at 50 pcs/bag.
Haitai manufactures 3.6 mm PA66 intermediate cable ties in 14 lengths from 100 to 500 mm for wholesale, OEM and industrial purchasing. The series is specified at 180 N (42 lbf) minimum loop tensile strength, uses INVISTA U4820L PA66, and is designed for installation from -20°C to +85°C. All listed models use the HTS-3.6X[length] format and standard 100 pcs/bag packaging; confirm color, bundle diameter, required documents and packaging artwork in the purchase specification.
Preguntas frecuentes del producto
Por lo general, se pueden organizar muestras para productos estándar. Para materiales, embalajes o colores personalizados, el tiempo de entrega de las muestras debe confirmarse antes de la producción.
Sí. El embalaje a granel, las bolsas de polietileno, las bolsas para minoristas, las etiquetas, las marcas de cartón y los requisitos de etiqueta privada se pueden discutir según la cantidad del pedido.
Por favor, proporcione ancho, largo, material, color, cantidad, embalaje, necesidades de certificación, puerto de destino y entorno de aplicación.
