About Haitai’s Nylon Cable Tie Factory

Factory purchasing quick reference

For direct factory sourcing, match the company identity, product specification and approved sample before confirming an order. Haitai’s standard self-locking range covers 8 width families; use the linked catalogue to select the required model.

Factory qualification documents

Both certificates state dates from 13 July 2026 to 12 July 2029, subject to their surveillance conditions. Request the relevant full documents and check current status and scope during supplier qualification; these are not all-product performance or chemical-compliance certifications.

Preparing an OEM or wholesale enquiry

For an HTS-200ST enquiry, specify the 4.8 × 200 mm model, quantity, color, required environment and packing. Add your artwork, barcode and destination requirements so the quotation can address the product and packaging together.

Compare cable tie sizes or request a factory quotation and samples. The catalogue’s 220 N value for this series is a minimum loop tensile test value, not a lifting capacity.

Nylon cable tie factory FAQ

Is Haitai a manufacturer or a trading company?

Haitai is a manufacturer of nylon cable ties and plastic wiring accessories established in 1999. Buyers can review the factory facilities shown on this page and request model specifications, samples and relevant factory documents before placing an order.

Where is Haitai’s cable tie factory located?

The factory is at No. 777 Lehu Road, Liushi, Yueqing, Wenzhou, Zhejiang, China. Use the company name Yueqing Haitai Plastics Manufacture Co., Ltd. when matching your enquiry with the factory documents.

Which standard nylon cable tie sizes can I source from Haitai?

The self-locking range includes 2.5, 3.6, 4.4, 4.8, 7.2, 7.6, 8.8 and 12 mm widths. Length, maximum bundle diameter and strength are model-specific; for example, the 4.8 mm series lists 15 lengths from 100 to 920 mm.

Can Haitai supply OEM or private-label cable tie packaging?

Yes, buyers can discuss bag quantities, private-label artwork, barcodes and carton marks for the selected order. As a standard packing reference, the 4.8 mm catalogue lists 100 pieces per bag for 100–710 mm models and 50 pieces for the 920 mm model; custom packing is confirmed separately.

Which ISO factory documents can buyers review?

The CQC references are 00126Q304598R001 for ISO 9001:2015 and 00126E302493R001 for ISO 14001:2015. Both state dates from 13 July 2026 to 12 July 2029, subject to surveillance conditions. These management-system documents do not certify the performance or chemical composition of every product.

How should I verify cable tie quality before a bulk order?

Approve the model, material, dimensions, sample conditioning, test method and acceptance criteria before production. For example, Haitai’s standard 4.8 mm PA66 catalogue specifies 220 N minimum loop tensile strength, which is not a safe suspended-load rating; check your sample against the agreed specification.

What are the MOQ and production lead time?

MOQ and production lead time are confirmed for the selected model, material, color, quantity and packaging. Send your target delivery date and quantities by model to receive an order-specific quotation; there is no universal figure stated here.

Can Haitai help replace an existing cable tie part?

Yes, send the existing part number, drawing or sample together with the required material, width, length, bundle diameter and minimum loop tensile strength. A nominal description such as 4.8 × 200 mm is only a starting point; locking geometry, environment and test requirements must also match. Approve a sample before treating a proposed model as interchangeable.

References reviewed on 31 August 2026: Haitai’s self-locking product catalogue, the 4.8 mm model table and the CQC documents identified above. Final supply is defined by the agreed model specification and order confirmation.