Haitai supplies reverse tooth cable ties with outside serrations and a smooth inner surface for wire harness bundling. The listed PA66HS version measures 4.6 × 200 mm, has a 50 mm maximum bundle diameter and a minimum tensile strength of 225 N, and is packed at 100 pcs/bag. Installation is specified from -20°C to +85°C; send the required quantity, color, service conditions and packaging for a factory quotation.
Material: PA66HS (heat-stabilized polyamide 6.6)
Installation temperature: -20°C to +85°C
Working temperature: -40°C to +105°C
Raw-material flammability: UL 94 HB (resin rating; request the applicable resin data sheet)
For short-term heat exposure, specify the peak temperature and exposure duration when requesting samples. Finished-product certification and application requirements should be confirmed for the selected model.
Détails du produit
Outside serrations leave the bundle-contact side of this PA66HS cable tie smooth. The listed 4.6 mm strap can be considered where contact with cable insulation matters; check the finished assembly, strap edges and installation tension on a sample.
PA66HS identifies a heat-stabilized polyamide 6.6 formulation, and Haitai’s listed working-temperature range for this version is -40°C to +105°C. The installation range is -20°C to +85°C; specify peak temperatures and exposure times when reviewing a wiring-harness application.
The 4.6 mm strap has outside serrations and a smooth bundle-contact face. Review insulation contact and tightening tension on the actual harness.
PA66HS is the listed heat-stabilized material. Working temperature: -40°C to +105°C; installation: -20°C to +85°C.
The listed 200 mm length accommodates a maximum 50 mm bundle diameter. Minimum tensile strength is 225 N, with 100 pcs/bag packaging.
Référence de la spécification
The table describes the 4.6 × 200 mm PA66HS reverse-tooth configuration currently listed by Haitai. Confirm the required color, exact order reference and any application-specific test documents when requesting samples.
| Parameter | Specification |
|---|---|
| Strap width | 4.6 mm |
| Overall length | 200 mm |
| Maximum bundle diameter | 50 mm |
| Minimum tensile strength | 225 N |
| Matière | PA66HS, heat-stabilized polyamide 6.6 |
| Strap structure | Outside serrations with a smooth inner surface |
| Installation temperature | -20°C to +85°C |
| Working temperature | -40°C to +105°C |
| Standard packaging | 100 pièces/sac |
| Listed hand tool | FSZ-800Z; confirm tool suitability and tension setting |
Request the 4.6 × 200 mm reverse-tooth configuration and confirm the exact HTS model reference in the quotation. For other sizes, provide your width, length and bundle-diameter requirements in mm.
The 225 N tensile value is not a safe working-load rating or an installation-tool tension setting. Check the selected tool and finished bundle before production use.
Applications
The listed 4.6 × 200 mm tie is intended for wire harness bundling in vehicle assemblies, electronics and control equipment where a smooth strap-contact surface is useful. Compare the measured bundle diameter with the 50 mm maximum and confirm temperature, vibration and fluid-exposure requirements for the actual installation.
For a broader selection checklist, see colliers de serrage pour câblage automobile and the cable tie size chart. PA66HS identifies the material formulation; it does not by itself establish approval to an automotive customer’s specification.
Faisceau de câblage automobile
Evaluate the 4.6 × 200 mm PA66HS tie for the intended vehicle harness. Check insulation contact, routing clearance and the applicable temperature profile.
Électronique et équipement de précision
Use the 50 mm maximum bundle diameter as an initial fit check for control-system wiring. Confirm the head clearance and tightening tension on a sample assembly.
This 4.6 mm reverse-tooth strap has serrations on the outside and a smooth inner face against the bundle. It offers a different contact surface from a conventional inside-serrated tie; check the strap, edges and locking head against your cable insulation.
The listed configuration is 4.6 × 200 mm with a maximum bundle diameter of 50 mm. Include the measured bundle diameter and required quantity in your enquiry, and confirm the exact HTS order reference before production.
The listed minimum tensile strength is 225 N. This is not a safe working-load rating, a lifting capacity or an installation-tool tension setting.
Installation is specified from -20°C to +85°C, while the listed working range for this PA66HS version is -40°C to +105°C. For peak-temperature exposure, provide the temperature and duration so that suitability can be reviewed for the selected model.
The 4.6 × 200 mm PA66HS version is an option to evaluate for automotive harness bundling. Confirm the customer specification, harness fit, temperature profile, vibration and fluid exposure; the material designation alone is not an automotive approval.
No: the PA66HS designation identifies heat-stabilized nylon, while outdoor UV performance must be specified separately for the selected 4.6 × 200 mm version. See our nylon 66 versus UV-resistant cable tie guide and request the relevant outdoor test information.
Haitai lists FSZ-800Z as the hand-tool reference for this configuration. Confirm compatibility and trial the tension setting on the actual harness; do not use the 225 N tensile value as a tightening setting.
The listed standard pack is 100 pcs/bag, and bulk or private-label requirements can be reviewed with the order. Send the 4.6 × 200 mm size, color, quantity, service conditions, destination and packaging requirements through the product enquiry form; learn more about the manufacturer on À propos de Haitai.
Emballage et OEM
Haitai peut prendre en charge diverses exigences d'emballage, notamment l'emballage en vrac, les sacs en polyéthylène standard, les sacs de détail, les étiquettes, les marques de carton et les exigences de marque privée sélectionnées. Veuillez partager votre marché cible, la quantité de sacs, la taille du carton et votre plan d'achat annuel pour confirmation.
Demande de devis
Produits Connexes
Haitai manufactures 7.2 mm heavy duty cable ties from INVISTA 4820L PA66 in 18 listed lengths from 150 mm to 760 mm. The series is listed at 560 N / 130 lbf tensile strength; buyers can specify length, bundle diameter, color, packaging and quantity for an OEM or bulk quotation. Tensile strength is a product test value, not a safe working-load rating.
Haitai PA46 (nylon 46) cable ties have a continuous operating temperature range of −40°C to +150°C and a time-limited high-temperature rating of +195°C for up to 500 hours. For heat-exposed automotive and industrial wiring, specify dimensions, tensile strength, temperature profile, quantity and packaging for a bulk or OEM quotation. Confirm the installation range for the selected model; the +195°C / 500-hour condition is not an unrestricted continuous operating rating.
Haitai manufactures PA12 (nylon 12) cable ties in widths from 2.5 to 12 mm, with all lengths in Haitai’s existing cable tie size range available in PA12. Installation is specified from -40°C to +85°C, and the long-term working-temperature upper limit is +105°C. For solar, outdoor, bulk or OEM purchasing, send the required width × length, bundle diameter, quantity, exposure conditions and packaging for a factory quotation.
Haitai manufactures PA66 metal pawl cable ties with a stainless steel locking insert in 27 listed models for wholesale, OEM and industrial supply. The range covers 2.4–10 mm widths, 100–699 mm lengths and published minimum tensile values from 80–550 N. Standard packaging is 100 pcs/bag, with installation specified from -20°C to +85°C; confirm the selected HTS model, pawl grade, color and test requirements in the purchase specification.
Haitai manufactures 8.8 mm extra heavy duty cable ties from INVISTA 4820L PA66 in 15 confirmed lengths from 175 mm to 1500 mm. All models follow the HTS-8.8X[length] naming format and are listed at 175 lbf tensile strength; buyers can specify length, bundle diameter, color, material grade, packaging and quantity for a bulk or OEM quotation.
Haitai manufactures 4.8 mm PA66 standard self-locking cable ties in 15 lengths from 100 to 920 mm for wholesale, OEM and industrial wiring. The series is specified at 220 N minimum loop tensile strength, uses INVISTA U4820L PA66, and is designed for installation from -20°C to +85°C. Models follow the HTS-4.8X[length] format; standard packaging is 100 pcs/bag except HTS-4.8X920 at 50 pcs/bag.
FAQ Produit
Des échantillons peuvent généralement être préparés pour les produits standards. Pour les matériaux, emballages ou couleurs personnalisés, le délai des échantillons doit être confirmé avant la production.
Oui. L'emballage en vrac, les sacs en poly, les sacs de vente au détail, les étiquettes, les marques de carton et les exigences de marque privée peuvent être discutés en fonction de la quantité de commande.
Veuillez fournir la largeur, la longueur, le matériau, la couleur, la quantité, l'emballage, les besoins en matière de certification, le port de destination et l'environnement d'application.
