Haitai manufactures PA12 (nylon 12) cable ties in widths from 2.5 to 12 mm, with all lengths in Haitai’s existing cable tie size range available in PA12. Installation is specified from -40°C to +85°C, and the long-term working-temperature upper limit is +105°C. For solar, outdoor, bulk or OEM purchasing, send the required width × length, bundle diameter, quantity, exposure conditions and packaging for a factory quotation.
Material: PA12 (polyamide 12 / nylon 12)
Installation temperature: -40°C to +85°C
Working temperature: -40°C to +105°C
Raw-material flammability: UL 94 HB (resin rating; request the applicable resin data sheet)
For outdoor service, specify UV exposure, chemicals and expected service conditions for the selected model. Resin flammability is not a finished-product certification or a service-life guarantee.
제품 상세 정보
PA12 generally absorbs less moisture than PA66, which can help reduce dimensional changes as humidity varies. This is a material-family characteristic, described in Arkema’s PA12 material overview; the selected finished tie still needs to match the application requirements.
Haitai specifies installation from -40°C to +85°C and working temperatures from -40°C to +105°C for this PA12 range. The +105°C figure is the long-term working upper limit, not the installation upper limit or a guarantee of a particular number of service years.
This range uses PA12, also called nylon 12, rather than PA612. Specify the PA12 material requirement in the purchase specification.
Long-term working-temperature upper limit: +105°C. Installation is specified from -40°C to +85°C.
PA12 cable ties cover widths from 2.5 to 12 mm. All lengths in Haitai’s existing cable tie size range can be supplied in PA12; specify the required width × length for quotation.
사양 참조
PA12 production covers 2.5–12 mm widths and all lengths in Haitai’s existing cable tie size range. The table below contains previously listed examples only, not the full PA12 size range or the maximum available lengths.
| 너비 | Previously listed length examples | Maximum bundle diameter for these length examples | Minimum tensile strength | Standard pack |
|---|---|---|---|---|
| 2.5 mm | 100–200 mm | 22–50 mm | 80 N | 100개/가방 |
| 3.6 mm | 150–400 mm | 35–114.5 mm | 180 N | 100개/가방 |
| 4.8 mm | 200–500 mm | 50–150 mm | 222 N | 100개/가방 |
| 7.6 mm | 200–500 mm | 50–150 mm | 560 N | 100개/가방 |
PA12 supply covers 2.5–12 mm widths and all existing Haitai length options, not just the examples above. Match the bundle-diameter value to the selected width and length when ordering.
The 80–560 N values shown above are existing PA12 catalogue references for those example widths, not safe working-load ratings or tool settings. Request the tensile specification for the exact PA12 model, including widths not shown here; do not substitute the tensile value of a PA66 version.
| Parameter | Specification |
|---|---|
| 재료 | PA12 (polyamide 12 / nylon 12) |
| Installation temperature | -40°C to +85°C |
| Working temperature | -40°C to +105°C |
| Long-term working upper limit | +105°C |
| Raw-material flammability | UL 94 HB; resin rating, not finished-product certification |
The PA12 designation and +105°C limit do not specify UV-weathering duration or compatibility with every chemical. Include sunlight exposure, the actual fluid and concentration, contact time and temperature when requesting an outdoor or chemical-exposure version.
애플리케이션
Start with the measured bundle diameter and select the required PA12 width from 2.5 to 12 mm. Specify outdoor exposure, mounting position, panel-side temperature and the project’s weathering requirements; use the solar PV cable tie guide to prepare the enquiry.
Compare the actual service temperature with the -40°C to +105°C working range, then identify salt exposure, oils, cleaning chemicals and contact duration. Select the exact PA12 model against those conditions rather than treating all chemical or offshore environments as equivalent.
Solar and Outdoor Installations
Select the required PA12 width from 2.5–12 mm and choose the length from Haitai’s existing cable tie size range. Confirm UV-weathering requirements and the temperature near the mounting surface for the project.
Marine and Harsh Environments
PA12 is an option to evaluate where cable routing faces moisture or salt exposure. Confirm the exact chemicals and exposure duration alongside the -40°C to +105°C working-temperature range.
Haitai confirms PA12 (polyamide 12 / nylon 12) for this range, not PA612. Include PA12 in the material requirement when requesting a sample or placing an OEM order.
Installation is specified from -40°C to +85°C, and working temperature from -40°C to +105°C. The +105°C value is the long-term working upper limit; it does not raise the installation upper limit above +85°C.
PA12 generally takes up less moisture than PA66, making moisture-related dimensional stability a useful selection factor. Compare the exact tie’s tensile strength, UV-weathering evidence and service conditions; the material name alone does not specify outdoor service life.
Haitai supplies PA12 cable ties for solar-project enquiries in widths from 2.5 to 12 mm. Select the size for the actual cable bundle, then confirm the project’s UV-weathering, temperature and mounting requirements; see cable ties for solar PV.
No: the PA12 material and -40°C to +105°C working range do not establish compatibility with every chemical. Provide the fluid, concentration, temperature, contact duration and salt exposure so the selected model can be reviewed for the application.
Haitai can supply PA12 cable ties in 2.5–12 mm widths, with all lengths in its existing cable tie size range available in PA12. The table on this page contains examples only, not width or length limits; send the required width × length combination and use the cable tie size chart to check the dimensions needed for a quotation.
Existing PA12 catalogue examples list 80 N for 2.5 mm, 180 N for 3.6 mm, 222 N for 4.8 mm and 560 N for 7.6 mm widths. Request the PA12 tensile specification for your exact model across the full 2.5–12 mm range. Tensile values are not lifting capacities, safe working loads or tool-tension settings.
The existing PA12 catalogue examples use 100 pcs/bag, and bulk or private-label packaging can be reviewed for the selected size. Send size, quantity, color, temperature, exposure conditions, destination and packaging details through the product enquiry form, or see 하이타이 소개 for manufacturer information.
포장 및 OEM
해태는 벌크 포장, 표준 비닐봉투, 소매용 봉투, 라벨, 카톤 마크 및 선택한 자체 브랜드 요구사항을 포함한 다양한 포장 요구사항을 지원할 수 있습니다. 확인을 위해 목표 시장, 봉투 수량, 카톤 크기 및 연간 구매 계획을 공유해 주시기 바랍니다.
견적 요청
관련 상품
Haitai manufactures 7.2 mm heavy duty cable ties from INVISTA 4820L PA66 in 18 listed lengths from 150 mm to 760 mm. The series is listed at 560 N / 130 lbf tensile strength; buyers can specify length, bundle diameter, color, packaging and quantity for an OEM or bulk quotation. Tensile strength is a product test value, not a safe working-load rating.
Haitai supplies reverse tooth cable ties with outside serrations and a smooth inner surface for wire harness bundling. The listed PA66HS version measures 4.6 × 200 mm, has a 50 mm maximum bundle diameter and a minimum tensile strength of 225 N, and is packed at 100 pcs/bag. Installation is specified from -20°C to +85°C; send the required quantity, color, service conditions and packaging for a factory quotation.
Haitai PA46 (nylon 46) cable ties have a continuous operating temperature range of −40°C to +150°C and a time-limited high-temperature rating of +195°C for up to 500 hours. For heat-exposed automotive and industrial wiring, specify dimensions, tensile strength, temperature profile, quantity and packaging for a bulk or OEM quotation. Confirm the installation range for the selected model; the +195°C / 500-hour condition is not an unrestricted continuous operating rating.
Haitai manufactures 7.6 mm heavy duty cable ties from INVISTA 4820L PA66 in 9 listed lengths from 200 mm to 550 mm. The series is listed at 130 lbf tensile strength; buyers can specify length, bundle diameter, color, packaging and quantity for an OEM or bulk quotation. Tensile strength is a product test value, not a safe working-load rating.
Haitai manufactures 3.6 mm PA66 intermediate cable ties in 14 lengths from 100 to 500 mm for wholesale, OEM and industrial purchasing. The series is specified at 180 N (42 lbf) minimum loop tensile strength, uses INVISTA U4820L PA66, and is designed for installation from -20°C to +85°C. All listed models use the HTS-3.6X[length] format and standard 100 pcs/bag packaging; confirm color, bundle diameter, required documents and packaging artwork in the purchase specification.
Haitai manufactures 2.5 mm PA66 mini cable ties in 10 lengths from 60 to 380 mm for wholesale, OEM and compact wire-management applications. The series is specified at 80 N (18 lbf) minimum loop tensile strength, uses INVISTA U4820L PA66, and is designed for installation from -20°C to +85°C. All listed models use the HTS-2.5X[length] format and standard 100 pcs/bag packaging; confirm color, bundle diameter, required documents and packaging artwork in the purchase specification.
제품 FAQ
표준 제품의 경우 샘플을 일반적으로 준비할 수 있습니다. 맞춤형 재료, 포장 또는 색상의 경우 샘플 제작 시기를 생산 전에 확인해야 합니다.
네. 주문 수량에 따라 벌크 포장, 폴리백, 리테일 백, 라벨, 박스 마크, 자체 브랜드 요구 사항에 대해 논의할 수 있습니다.
너비, 길이, 재질, 색상, 수량, 포장, 인증 요구 사항, 목적지 항구, 적용 환경을 알려주십시오.
