Haitai manufactures colour cable ties, also called colored zip ties, from INVISTA U4820L PA66 for wire identification, cable bundling and private-label supply. Choose the HTS size, required tensile strength and color reference; the installation range is -20°C to +85°C. Standard and custom colors can be quoted with 100-piece bags or bulk packaging, with the final color sample, size and pack count agreed before production.
Send your color-card reference or an approved physical sample for matching. Pack options include 100, 500 or 1,000 pcs, depending on tie size and the agreed order specification.
제품 상세 정보
Colour cable ties combine PA66 self-locking fastening with visual identification of wires, harnesses and product groups. Specify a color alongside the width and length in mm so each cable group can follow your identification plan.
Options include red, yellow, blue, green, black, gray, brown and custom colors. Send 1 color-card reference or physical sample for each required shade, then approve the production color sample before ordering.
Haitai uses INVISTA U4820L PA66 as the base resin for this nylon cable tie range, with the color formulation matched to the order. The installation range is -20°C to +85°C; specify outdoor UV exposure separately from the color.
Send 1 color-card reference or physical sample per shade. Approve the matched PA66 sample for your color identification or branding requirement.
INVISTA U4820L PA66 base resin with an order-specific color formulation. Installation temperature: -20°C to +85°C.
Request 100, 500 or 1,000 pcs packs where suitable for the selected size. Specify single-color or mixed-color contents, labels and carton marks.
사양 참조
Start with the 2.5, 3.6, 4.8 and 7.6 mm standard self-locking families below when requesting colored zip ties. Select an actual listed length, then confirm color availability, the finished-product tensile rating and packaging for that HTS model.
| Width / model family | Listed length range | Base-series tensile rating | Standard pack reference |
|---|---|---|---|
| 2.5 mm: HTS-2.5X[length] | 60–380 mm | 80 N | 100개/가방 |
| 3.6 mm: HTS-3.6X[length] | 100–500 mm | 180 N | 100개/가방 |
| 4.8 mm: HTS-4.8X[length] | 100–920 mm | 220 N | 100–710 mm: 100 pcs/bag; 920 mm: 50 pcs/bag |
| 7.6 mm: HTS-7.6X[length] | 200–550 mm | 130 lbf | Confirm pack count in quotation |
The 4 families above are size-selection references from Haitai’s standard self-locking range; follow each linked page for listed lengths and bundle diameters. Confirm the exact size, color formulation, finished-product tensile rating and packaging in the quotation.
For example, specify HTS-4.8X200, blue with the required quantity and pieces per bag. Use the cable tie size chart to compare widths, lengths and bundle capacity.
애플리케이션
Use PA66 colour cable ties to distinguish wire harnesses, maintenance groups, warehouse bundles and retail product packs. An identification plan could use 3 colors for 3 separate cable groups; record your own color meanings in the project documentation.
For equipment wiring, choose the HTS width, length in mm and tensile rating before selecting a shade. For packaging and retail, include the pieces per bag and color mix in the order specification.
Cable Identification
Assign each PA66 tie color to a documented wire group or equipment zone. Select width and length in mm to match the bundle.
Packaging and Organization
Specify single-color or mixed-color packs for warehouse and retail use. Request 100, 500 or 1,000 pcs packs according to the selected size.
Send 1 color-card reference or physical sample for each shade you need. Haitai can evaluate color matching for the PA66 formulation, with the approved sample and acceptance criteria agreed before production.
Start with the 2.5, 3.6, 4.8 and 7.6 mm self-locking families in the reference table. Confirm the exact listed length, bundle diameter and color combination in the quotation.
Use the format HTS-[width]X[length], such as HTS-4.8X200, and state blue or your other color reference separately. Include quantity, pieces per bag and any labeling requirements in the inquiry.
Specify the finished-product tensile rating for the selected model and color formulation. For example, the standard 4.8 mm base series is listed at 220 N; the reference table is not a test report for every custom color.
Color alone does not establish UV resistance in a PA66 tie. State sunlight exposure and service conditions, and request a suitable formulation and test evidence; see the PA66 and UV-resistant cable tie guide.
The base resin is INVISTA U4820L PA66 with a color formulation selected for the order. The installation range is -20°C to +85°C; confirm special service-temperature requirements separately.
Request single-color or mixed-color packs and specify 100, 500 or 1,000 pcs per pack where suitable for the selected size. As a standard size-family reference, HTS-4.8X920 uses 50 pcs/bag; final pack counts, labels and carton marks are agreed in the quotation.
Yueqing Haitai Plastics Manufacture Co., Ltd., established in 1999, supplies nylon cable ties for wholesale and OEM orders. Send the HTS model or dimensions in mm, color reference, tensile requirement, quantity, packaging and destination through the inquiry form, and request samples for color and fit approval.
포장 및 OEM
해태는 벌크 포장, 표준 비닐봉투, 소매용 봉투, 라벨, 카톤 마크 및 선택한 자체 브랜드 요구사항을 포함한 다양한 포장 요구사항을 지원할 수 있습니다. 확인을 위해 목표 시장, 봉투 수량, 카톤 크기 및 연간 구매 계획을 공유해 주시기 바랍니다.
견적 요청
관련 상품
Haitai supplies reverse tooth cable ties with outside serrations and a smooth inner surface for wire harness bundling. The listed PA66HS version measures 4.6 × 200 mm, has a 50 mm maximum bundle diameter and a minimum tensile strength of 225 N, and is packed at 100 pcs/bag. Installation is specified from -20°C to +85°C; send the required quantity, color, service conditions and packaging for a factory quotation.
Haitai PA46 (nylon 46) cable ties have a continuous operating temperature range of −40°C to +150°C and a time-limited high-temperature rating of +195°C for up to 500 hours. For heat-exposed automotive and industrial wiring, specify dimensions, tensile strength, temperature profile, quantity and packaging for a bulk or OEM quotation. Confirm the installation range for the selected model; the +195°C / 500-hour condition is not an unrestricted continuous operating rating.
Haitai manufactures PA12 (nylon 12) cable ties in widths from 2.5 to 12 mm, with all lengths in Haitai’s existing cable tie size range available in PA12. Installation is specified from -40°C to +85°C, and the long-term working-temperature upper limit is +105°C. For solar, outdoor, bulk or OEM purchasing, send the required width × length, bundle diameter, quantity, exposure conditions and packaging for a factory quotation.
Haitai manufactures PA66 metal pawl cable ties with a stainless steel locking insert in 27 listed models for wholesale, OEM and industrial supply. The range covers 2.4–10 mm widths, 100–699 mm lengths and published minimum tensile values from 80–550 N. Standard packaging is 100 pcs/bag, with installation specified from -20°C to +85°C; confirm the selected HTS model, pawl grade, color and test requirements in the purchase specification.
Haitai manufactures 8.8 mm extra heavy duty cable ties from INVISTA 4820L PA66 in 15 confirmed lengths from 175 mm to 1500 mm. All models follow the HTS-8.8X[length] naming format and are listed at 800 N tensile strength; buyers can specify length, bundle diameter, color, material grade, packaging and quantity for a bulk or OEM quotation.
Haitai manufactures 2.5 mm PA66 mini cable ties in 10 lengths from 60 to 380 mm for wholesale, OEM and compact wire-management applications. The series is specified at 80 N (18 lbf) minimum loop tensile strength, uses INVISTA U4820L PA66, and is designed for installation from -20°C to +85°C. All listed models use the HTS-2.5X[length] format and standard 100 pcs/bag packaging; confirm color, bundle diameter, required documents and packaging artwork in the purchase specification.
제품 FAQ
표준 제품의 경우 샘플을 일반적으로 준비할 수 있습니다. 맞춤형 재료, 포장 또는 색상의 경우 샘플 제작 시기를 생산 전에 확인해야 합니다.
네. 주문 수량에 따라 벌크 포장, 폴리백, 리테일 백, 라벨, 박스 마크, 자체 브랜드 요구 사항에 대해 논의할 수 있습니다.
너비, 길이, 재질, 색상, 수량, 포장, 인증 요구 사항, 목적지 항구, 적용 환경을 알려주십시오.
