Haitai supplies reverse tooth cable ties with outside serrations and a smooth inner surface for wire harness bundling. The listed PA66HS version measures 4.6 × 200 mm, has a 50 mm maximum bundle diameter and a minimum tensile strength of 225 N, and is packed at 100 pcs/bag. Installation is specified from -20°C to +85°C; send the required quantity, color, service conditions and packaging for a factory quotation.
Material: PA66HS (heat-stabilized polyamide 6.6)
Installation temperature: -20°C to +85°C
Working temperature: -40°C to +105°C
Raw-material flammability: UL 94 HB (resin rating; request the applicable resin data sheet)
For short-term heat exposure, specify the peak temperature and exposure duration when requesting samples. Finished-product certification and application requirements should be confirmed for the selected model.
製品詳細
Outside serrations leave the bundle-contact side of this PA66HS cable tie smooth. The listed 4.6 mm strap can be considered where contact with cable insulation matters; check the finished assembly, strap edges and installation tension on a sample.
PA66HS identifies a heat-stabilized polyamide 6.6 formulation, and Haitai’s listed working-temperature range for this version is -40°C to +105°C. The installation range is -20°C to +85°C; specify peak temperatures and exposure times when reviewing a wiring-harness application.
The 4.6 mm strap has outside serrations and a smooth bundle-contact face. Review insulation contact and tightening tension on the actual harness.
PA66HS is the listed heat-stabilized material. Working temperature: -40°C to +105°C; installation: -20°C to +85°C.
The listed 200 mm length accommodates a maximum 50 mm bundle diameter. Minimum tensile strength is 225 N, with 100 pcs/bag packaging.
仕様参照
The table describes the 4.6 × 200 mm PA66HS reverse-tooth configuration currently listed by Haitai. Confirm the required color, exact order reference and any application-specific test documents when requesting samples.
| Parameter | Specification |
|---|---|
| Strap width | 4.6 mm |
| Overall length | 200 mm |
| Maximum bundle diameter | 50 mm |
| Minimum tensile strength | 225 N |
| 素材 | PA66HS, heat-stabilized polyamide 6.6 |
| Strap structure | Outside serrations with a smooth inner surface |
| Installation temperature | -20°C to +85°C |
| Working temperature | -40°C to +105°C |
| Standard packaging | 100個/袋 |
| Listed hand tool | FSZ-800Z; confirm tool suitability and tension setting |
Request the 4.6 × 200 mm reverse-tooth configuration and confirm the exact HTS model reference in the quotation. For other sizes, provide your width, length and bundle-diameter requirements in mm.
The 225 N tensile value is not a safe working-load rating or an installation-tool tension setting. Check the selected tool and finished bundle before production use.
アプリケーション
The listed 4.6 × 200 mm tie is intended for wire harness bundling in vehicle assemblies, electronics and control equipment where a smooth strap-contact surface is useful. Compare the measured bundle diameter with the 50 mm maximum and confirm temperature, vibration and fluid-exposure requirements for the actual installation.
For a broader selection checklist, see 自動車配線用結束バンド and the cable tie size chart. PA66HS identifies the material formulation; it does not by itself establish approval to an automotive customer’s specification.
Automotive Wiring Harness
Evaluate the 4.6 × 200 mm PA66HS tie for the intended vehicle harness. Check insulation contact, routing clearance and the applicable temperature profile.
Electronics and Precision Equipment
Use the 50 mm maximum bundle diameter as an initial fit check for control-system wiring. Confirm the head clearance and tightening tension on a sample assembly.
This 4.6 mm reverse-tooth strap has serrations on the outside and a smooth inner face against the bundle. It offers a different contact surface from a conventional inside-serrated tie; check the strap, edges and locking head against your cable insulation.
The listed configuration is 4.6 × 200 mm with a maximum bundle diameter of 50 mm. Include the measured bundle diameter and required quantity in your enquiry, and confirm the exact HTS order reference before production.
The listed minimum tensile strength is 225 N. This is not a safe working-load rating, a lifting capacity or an installation-tool tension setting.
Installation is specified from -20°C to +85°C, while the listed working range for this PA66HS version is -40°C to +105°C. For peak-temperature exposure, provide the temperature and duration so that suitability can be reviewed for the selected model.
The 4.6 × 200 mm PA66HS version is an option to evaluate for automotive harness bundling. Confirm the customer specification, harness fit, temperature profile, vibration and fluid exposure; the material designation alone is not an automotive approval.
No: the PA66HS designation identifies heat-stabilized nylon, while outdoor UV performance must be specified separately for the selected 4.6 × 200 mm version. See our nylon 66 versus UV-resistant cable tie guide and request the relevant outdoor test information.
Haitai lists FSZ-800Z as the hand-tool reference for this configuration. Confirm compatibility and trial the tension setting on the actual harness; do not use the 225 N tensile value as a tightening setting.
The listed standard pack is 100 pcs/bag, and bulk or private-label requirements can be reviewed with the order. Send the 4.6 × 200 mm size, color, quantity, service conditions, destination and packaging requirements through the product enquiry form; learn more about the manufacturer on ハイタイについて.
パッケージング・OEM
ハイタイは、バルク包装、標準ポリ袋、小売用袋、ラベル、カートンマーク、および選択されたプライベートラベルの要件を含む、さまざまな包装要件に対応できます。確認のため、ターゲット市場、袋の数量、カートンのサイズ、および年間購入計画をお知らせください。.
お見積もり依頼
関連製品
逆ねじタイプナイロン結束バンドは、外向きの歯と滑らかな内面で設計されており、スポンジの被覆、フォームカバー、柔らかい遊具の周りをより安全に固定できます。.
Haitai manufactures PA12 (nylon 12) cable ties in widths from 2.5 to 12 mm, with all lengths in Haitai’s existing cable tie size range available in PA12. Installation is specified from -40°C to +85°C, and the long-term working-temperature upper limit is +105°C. For solar, outdoor, bulk or OEM purchasing, send the required width × length, bundle diameter, quantity, exposure conditions and packaging for a factory quotation.
Haitai manufactures colour cable ties, also called colored zip ties, from INVISTA U4820L PA66 for wire identification, cable bundling and private-label supply. Choose the HTS size, required tensile strength and color reference; the installation range is -20°C to +85°C. Standard and custom colors can be quoted with 100-piece bags or bulk packaging, with the final color sample, size and pack count agreed before production.
Haitai manufactures double sided toothed cable ties from PA66 nylon for cable bundling, wire harness assembly and OEM supply. Teeth on both sides of the strap distinguish this design from conventional one-sided ties; installation is specified from -20°C to +85°C. Send the required width, length, bundle diameter, tensile strength and quantity for model selection, with 100 pcs/bag or bulk packaging to suit the order.
Haitai manufactures 7.6 mm heavy duty cable ties from INVISTA 4820L PA66 in 13 listed lengths from 200 mm to 750 mm. The series is listed at 550 N tensile strength; buyers can specify length, bundle diameter, color, packaging and quantity for an OEM or bulk quotation. Tensile strength is a product test value, not a safe working-load rating.
Haitai manufactures 3.6 mm PA66 intermediate cable ties in 14 lengths from 100 to 500 mm for wholesale, OEM and industrial purchasing. The series is specified at 180 N (42 lbf) minimum loop tensile strength, uses INVISTA U4820L PA66, and is designed for installation from -20°C to +85°C. All listed models use the HTS-3.6X[length] format and standard 100 pcs/bag packaging; confirm color, bundle diameter, required documents and packaging artwork in the purchase specification.
製品FAQ
標準製品につきましては、通常サンプル手配が可能です。特注の素材、包装、または色につきましては、生産前にサンプルの時期をご確認ください。.
はい。バルク梱包、ポリ袋、小売用袋、ラベル、カートンマーク、プライベートラベルの要件については、注文数量に基づいてご相談いただけます。.
幅、長さ、素材、色、数量、梱包、認証要件、仕向港、および適用環境を提供してください。.
