Haitai releasable cable ties use a release tab to open and readjust the strap without cutting. Made with INVISTA U4820L PA66, the HTN catalog offers 4.8 mm and 7.6 mm widths, lengths from 150 mm to 760 mm, and an installation range of −20°C to +85°C; specify size, bundle diameter, color and packaging for bulk or OEM supply.
Material: PA66 (nylon 66), INVISTA U4820L.
Series: HTN, with release-tab design.
Strap widths: 4.8 mm and 7.6 mm.
Catalog length range: 150–760 mm; available lengths depend on width.
Installation temperature: −20°C to +85°C.
Catalog tensile strength: 220 N; not a safe working-load rating.
Standard packaging: 100 pcs/bag; confirm private-label options with the order.
제품 상세 정보
Haitai releasable cable ties combine a self-locking PA66 strap with a release tab for adjustable wire and cable bundling. Choose from 4.8 mm and 7.6 mm widths for temporary routing, rewiring and equipment maintenance.
The standard material is INVISTA U4820L, with an installation temperature range of −20°C to +85°C. Confirm working-temperature and exposure requirements for the selected order rather than treating installation limits as a service-life guarantee.
The HTN catalog lists 13 sizes with 220 N tensile strength and 100개/가방 packaging. Select the actual bundle diameter and width-specific length from the size table; not every length is available in both widths.
Open and readjust the strap using its release tab instead of cutting it. Choose the 4.8 mm or 7.6 mm version with enough clearance to reach the tab after installation.
The standard range uses INVISTA U4820L PA66. Install within −20°C to +85°C and confirm any special outdoor or fluid-exposure requirements with the selected order.
Plan bundle size and routing clearance in mm so wires can be added or removed during service. Inspect the strap and locking area before reuse; no fixed reuse-cycle rating is stated for this catalog range.
사양 참조
The HTN catalog includes 4.8 mm and 7.6 mm widths with model-specific lengths and maximum bundle diameters. Dimensions below are in mm and tensile strength is in N to keep the order specification consistent.
| 모델 | Width (mm) | Length (mm) | Max. bundle diameter (mm) | Catalog min. tensile strength (N) |
|---|---|---|---|---|
| HTN-200A | 4.8 | 200 | 50 | 220 |
| HTN-300A | 4.8 | 300 | 80 | 220 |
| HTN-380A | 4.8 | 370 | 106 | 220 |
| HTN-150B | 7.6 | 150 | 35 | 220 |
| HTN-200B | 7.6 | 200 | 50 | 220 |
| HTN-250B | 7.6 | 250 | 66 | 220 |
| HTN-300B | 7.6 | 300 | 82 | 220 |
| HTN-350B | 7.6 | 350 | 90 | 220 |
| HTN-370B | 7.6 | 370 | 102 | 220 |
| HTN-400B | 7.6 | 400 | 110 | 220 |
| HTN-500B | 7.6 | 500 | 150 | 220 |
| HTN-610B | 7.6 | 610 | 180 | 220 |
| HTN-760B | 7.6 | 760 | 205 | 220 |
All 13 listed models: PA66, INVISTA U4820L; standard packaging 100개/가방. HTN-380A has an actual length of 370 mm; use the dimensions in this table rather than inferring length from the model number.
| Parameter | Standard range / ordering requirement |
|---|---|
| Material and grade | PA66 (nylon 66), INVISTA U4820L |
| Installation temperature | −20°C to +85°C |
| Working environment | Specify operating temperature, exposure duration, fluid contact and vibration requirements |
| Releasing and reuse | Release-tab design; inspect before reuse, no fixed cycle-count claim |
| Natural and UV versions | Natural and UV-black options by order; confirm the selected configuration and exposure requirements |
| Installation tension | Set for cable-jacket limits and assembly requirements, not directly from the 220 N tensile figure |
| 포장 | 100 pcs/bag; confirm bulk, retail labels and carton markings |
| 문서 | Request selected-model dimensions, test information and applicable certificate scope |
The 220 N value is catalog tensile strength, not lifting capacity or a safe working load. For selection guidance, see the cable tie size chart and tensile strength guide.
For broader options, visit our reusable and releasable cable tie purchasing guide or learn about Haitai manufacturing. Send your HTN model, quantity and packaging requirements for a quotation.
애플리케이션
Use the release-tab design where wire routing may change during assembly or maintenance. Check the actual bundle diameter against the selected 4.8 mm or 7.6 mm model and leave access to the release tab.
For control cabinets, computer cables and equipment harnesses, choose a strap length that fits the bundle without excessive tightening. The 150–760 mm catalog range spans different models and is not a universal fit range for one tie.
전기 배선 및 제어반
Organize adjustable wiring routes using the selected model’s maximum bundle diameter in mm. Plan access for maintenance and follow the cable supplier’s jacket-compression limits.
유지보수 및 임시 묶음
Use the release tab when adding, removing or repositioning cables, then inspect the strap and lock before reuse. The listed 220 N tensile figure does not specify how many release-and-retighten cycles a tie can complete.
This PA66 tie has a release tab that allows the strap to be opened and readjusted without cutting. Choose 4.8 mm or 7.6 mm width and check that the release tab remains accessible in the finished assembly.
The catalog lists 13 HTN models in 4.8 mm and 7.6 mm widths, with an overall length range of 150–760 mm. Use the model table for the actual width, length and maximum bundle diameter combination; HTN-380A is 370 mm long.
The existing catalog lists 220 N minimum tensile strength for this releasable range. It is not a lifting rating, safe working load or installation-tool tension setting.
The standard range uses INVISTA U4820L PA66 and installs at −20°C to +85°C. State the operating temperature and exposure conditions separately when requesting application confirmation.
No fixed reuse-cycle count is stated for this PA66 range. Inspect the strap, teeth and release mechanism before reuse, and replace a damaged tie or one that no longer locks securely.
No: this product is a molded PA66 strap with a locking head and release tab. Hook-and-loop straps use a different fastening mechanism; specify which design you need when comparing reusable cable-management products.
Request the UV-black configuration and state the expected outdoor exposure for the selected PA66 model. Black appearance alone does not establish UV test performance or a guaranteed service life.
Send the selected HTN model, bundle diameter in mm, color, quantity, destination and packaging requirements. The catalog packing is 100 pcs/bag; confirm samples, lead time, labels and carton markings through the product inquiry form.
포장 및 OEM
해태는 벌크 포장, 표준 비닐봉투, 소매용 봉투, 라벨, 카톤 마크 및 선택한 자체 브랜드 요구사항을 포함한 다양한 포장 요구사항을 지원할 수 있습니다. 확인을 위해 목표 시장, 봉투 수량, 카톤 크기 및 연간 구매 계획을 공유해 주시기 바랍니다.
견적 요청
관련 상품
Haitai tube fixing cable ties combine a tube-positioning structure with a self-locking PA66 strap for equipment tube, hose and conduit routing. The standard range uses INVISTA U4820L and installs at −20°C to +85°C; specify actual tube outside diameter, wall thickness, holder clearance and packaging for bulk or OEM orders.
Haitai mountable head cable ties combine a self-locking PA66 strap and mounting hole for screw or rivet fixing to panels and equipment. The standard range uses INVISTA U4820L, with catalog lengths of 100–380 mm and an installation range of −20°C to +85°C; confirm dimensions, fastener fit and packaging for bulk or OEM orders.
Haitai double locking cable ties use INVISTA U4820L PA66 with an outside-serrated strap for wire, hose and pipe bundling. The HTJ series offers 6.0 mm and 9.0 mm widths, four lengths from 115 mm to 350 mm, and an installation range of −20°C to +85°C; send model, bundle diameter, color and packaging requirements for a bulk or OEM quotation.
Haitai double head cable ties secure two cable bundles, hoses or pipes in separate connected loops using two independent locking heads. The HTD series uses INVISTA U4820L PA66, with 4.8 mm width, catalog lengths of 200, 250, 300 and 370 mm and an installation range of −20°C to +85°C; confirm both bundle diameters and packaging for bulk or OEM supply.
Haitai chassis cable ties position automotive wiring harnesses using a separate head and strap, both made from INVISTA U4820L PA66. The HTX-250CT / HTX-280CT range offers 7.5 × 250 mm / 7.5 × 280 mm sizes and an installation temperature of −20°C to +85°C; specify bundle diameter, mounting layout, matching accessories and packaging for bulk or OEM supply.
제품 FAQ
표준 제품의 경우 샘플을 일반적으로 준비할 수 있습니다. 맞춤형 재료, 포장 또는 색상의 경우 샘플 제작 시기를 생산 전에 확인해야 합니다.
네. 주문 수량에 따라 벌크 포장, 폴리백, 리테일 백, 라벨, 박스 마크, 자체 브랜드 요구 사항에 대해 논의할 수 있습니다.
너비, 길이, 재질, 색상, 수량, 포장, 인증 요구 사항, 목적지 항구, 적용 환경을 알려주십시오.
