Haitai tube fixing cable ties combine a tube-positioning structure with a self-locking PA66 strap for equipment tube, hose and conduit routing. The standard range uses INVISTA U4820L and installs at −20°C to +85°C; specify actual tube outside diameter, wall thickness, holder clearance and packaging for bulk or OEM orders.
Material: PA66 (nylon 66), INVISTA U4820L
Installation temperature: −20°C to +85°C
Catalog working temperature: −40°C to +85°C; confirm the selected model and exposure conditions.
Tube fit: Confirm actual outside diameter, wall thickness and holder clearance in mm.
Packaging: 100 pcs/bag or bulk; confirm OEM labels and carton markings with the order.
Documentation: Resin flame data and finished-product certification have different scopes; request documents for the selected model.
Détails du produit
Haitai tube fixing cable ties combine a tube-positioning structure with a self-locking PA66 strap for routing tubes, hoses and conduits on equipment. The standard range uses INVISTA U4820L and has an installation temperature range of −20°C to +85°C.
Also called pipe fixing ties or tube holder cable ties, this design is selected around the actual outside diameter in mm, the tube material and the installation layout. Check wall thickness, any protective covering and available clearance before confirming the model.
For bulk and OEM orders, provide the tube outside diameter, strap dimensions and fixing arrangement in mm, together with color, quantity and packaging. Learn about Haitai manufacturing or send a drawing through the product inquiry form for selection support.
Match the holder profile to the actual tube outside diameter and available clearance in mm; confirm the selected drawing.
PA66 nylon made with INVISTA U4820L, with an installation temperature range of −20°C to +85°C.
Plan PA66 tube routing around equipment clearances in mm, allowing for movement and the tube supplier’s compression limits.
Référence de la spécification
Specify the tube’s actual outside diameter, wall thickness, strap width × length and installation clearance in mm. The table separates the standard material and temperature information from dimensions and application requirements that need model-specific confirmation.
| Parameter | Haitai tube fixing cable ties / ordering requirement |
|---|---|
| Matière | PA66 (nylon 66), INVISTA U4820L for the standard range. |
| Installation temperature | −20°C to +85°C. |
| Catalog working temperature | −40°C to +85°C; confirm suitability for the selected model, loading and exposure duration. |
| Tube fit | Provide actual outside diameter in mm, including any covering, plus tube material and wall thickness. Inner diameter alone does not define holder fit. |
| Tie dimensions | Specify strap width × length in mm; confirm the selected model and usable fastening range. |
| Holder and layout | Confirm holder geometry, support arrangement, spacing and clearance in mm from the installation drawing. |
| Tensile requirement | Specify the required tie tensile strength in N and the test conditions; this is not a tube-pressure or complete-assembly load rating. |
| Installation tension | Confirm tool tension and permitted compression with the tube supplier and application requirements; do not infer a setting from tie tensile strength. |
| Color and exposure | Natural or custom colors by order; confirm UV resistance, fluid contact, vibration and temperature requirements for the selected configuration. |
| Raw-material flame reference | The U4820L resin datasheet lists UL 94 V-2 at specified specimen thicknesses; this is not a blanket UL certification for the finished tie. |
| Emballage | Catalog option: 100 pcs/bag or bulk; OEM labels and carton markings can be confirmed with the order. |
| Model and documents | Confirm the complete order reference and request model-specific dimensions, test information and applicable compliance documents. |
Installation: −20°C to +85°C. Catalog working range: −40°C to +85°C. These are different conditions; exposure above the catalog working range needs separate confirmation of temperature, duration and acceptance criteria.
The INVISTA U4820L resin datasheet lists UL 94 V-2 for specimens of 0.40, 0.71, 1.5 and 3.0 mm thickness. This raw-material reference does not establish certification or identical test performance for every finished tube fixing tie.
For tube selection, use the actual outside diameter in mm and check the tube supplier’s compression limits. See the cable tie size chart and tensile strength guide for general selection background.
Applications
Hydraulic and Pneumatic Tube Fixing
Consider this PA66 design for tube positioning and routing in machinery, subject to application validation. Provide outside diameter and wall thickness in mm, and confirm compression limits and movement allowance; it is not a pressure-sealing connection.
Equipment and Industrial Pipe Routing
Plan conduit, hose and tube routes using the holder geometry and installation clearances in mm. Confirm the selected configuration against working temperature, fluids, vibration and any vehicle-specific requirements.
They use a tube-positioning structure and self-locking PA66 strap for routing tubes, hoses and conduits on equipment. Select the model using the actual outside diameter and installation clearance in mm, together with the operating conditions.
Provide the actual outside diameter in mm, including any protective covering that contacts the holder. Also state tube material, wall thickness and dimensional tolerances; inside diameter alone does not establish fit.
Do not treat this PA66 routing tie as a pressure-sealing clamp or a verified retention device for a hose connection. Pressure, sealing and connection-retention requirements need separately qualified components and application validation.
Confirm the permitted compression with the hose supplier and select the installation tension accordingly. Tie tensile strength in N is not an installation-tool setting or a pressure rating, and excessive tightening must not be used to compensate for an unsuitable holder fit.
The installation temperature is −20°C to +85°C, while the existing catalog working range is −40°C to +85°C. Confirm operating suitability for the selected model, load and exposure duration, and obtain separate confirmation for higher-temperature excursions.
No: the cited INVISTA U4820L resin datasheet lists UL 94 V-2 for specified specimen thicknesses, not blanket certification of every finished tie. Request the applicable certificate or test documentation for the exact product model and configuration.
Specify the required color and outdoor exposure for the PA66 configuration when requesting a quotation. Custom color, black appearance or the PA66 material name alone does not confirm UV resistance, chemical compatibility or service life.
Send tube outside diameter and wall thickness in mm, strap dimensions, an installation drawing, temperature and exposure requirements, color, quantity and destination. The existing catalog includes 100 pcs/bag or bulk options; confirm labels, carton markings and other OEM packaging requirements with the selected order.
Emballage et OEM
Haitai peut prendre en charge diverses exigences d'emballage, notamment l'emballage en vrac, les sacs en polyéthylène standard, les sacs de détail, les étiquettes, les marques de carton et les exigences de marque privée sélectionnées. Veuillez partager votre marché cible, la quantité de sacs, la taille du carton et votre plan d'achat annuel pour confirmation.
Demande de devis
Produits Connexes
Haitai reusable push-mount cable ties combine a releasable PA66 strap with a push-in mounting head for adjustable cable routing on panels and frames. The standard range uses INVISTA U4820L and installs at −20°C to +85°C; confirm mounting-hole dimensions, panel thickness, bundle size and packaging for bulk or OEM supply.
Haitai releasable cable ties use a release tab to open and readjust the strap without cutting. Made with INVISTA U4820L PA66, the HTN catalog offers 4.8 mm and 7.6 mm widths, lengths from 150 mm to 760 mm, and an installation range of −20°C to +85°C; specify size, bundle diameter, color and packaging for bulk or OEM supply.
Les attaches de câbles magiques sont des attaches de câbles réutilisables à crochets et boucles conçues pour le groupage flexible, la fixation temporaire et l'organisation facile des câbles.
Serre-câbles pour château gonflable/Serre-câbles pour aire de jeux pour enfants/Serre-câbles pour équipement de jeu pour enfants/Serre-câbles colorés pour enfants
Haitai double head cable ties secure two cable bundles, hoses or pipes in separate connected loops using two independent locking heads. The HTD series uses INVISTA U4820L PA66, with 4.8 mm width, catalog lengths of 200, 250, 300 and 370 mm and an installation range of −20°C to +85°C; confirm both bundle diameters and packaging for bulk or OEM supply.
Haitai chassis cable ties position automotive wiring harnesses using a separate head and strap, both made from INVISTA U4820L PA66. The HTX-250CT / HTX-280CT range offers 7.5 × 250 mm / 7.5 × 280 mm sizes and an installation temperature of −20°C to +85°C; specify bundle diameter, mounting layout, matching accessories and packaging for bulk or OEM supply.
FAQ Produit
Des échantillons peuvent généralement être préparés pour les produits standards. Pour les matériaux, emballages ou couleurs personnalisés, le délai des échantillons doit être confirmé avant la production.
Oui. L'emballage en vrac, les sacs en poly, les sacs de vente au détail, les étiquettes, les marques de carton et les exigences de marque privée peuvent être discutés en fonction de la quantité de commande.
Veuillez fournir la largeur, la longueur, le matériau, la couleur, la quantité, l'emballage, les besoins en matière de certification, le port de destination et l'environnement d'application.
